Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Fordham Homeowners
If your energy bills climb while some rooms never quite heat or cool, the ducts are usually the culprit, not the furnace. Leaky joints, torn flex runs, and disconnected boots waste the air you’re already paying for while pulling attic dust and basement smells into the living space. Our technicians have up to 8 years of experience tracking down exactly where a system is losing air, and we handle both the repair and the sealing on the same visit. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday, with same-day appointments available in Fordham. Call (833) 901-6929 and a written, flat price comes before any work starts.
What Our Duct Repair & Sealing Service Includes
Duct repair and sealing covers every weak point in the air pathway: the seams, joints, boots, and flex connections where conditioned air escapes. Below is what we actually do under each heading, and why the job matters more in a place like Fordham than the sales pitch suggests.
Duct Sealing
Duct sealing closes the gaps between duct sections that let treated air bleed into the ceiling void or crawlspace before it ever reaches a register. You need it when rooms feel under-supplied, when return grilles whistle, or when the system runs and runs without reaching temperature. We use mastic and mesh on accessible connections rather than relying on tape alone, because tape lifts as ductwork flexes through heating season. Sealing is usually the cheapest way to recover lost capacity before anyone talks about bigger equipment.

Flex Duct Repair
Flex duct is the corrugated, insulated run that carries air from a trunk line to a single room, and it fails more often than metal because it kinks, sags, and tears. You need flex repair when a run is crushed behind drywall, when its outer jacket is torn so insulation goes slack, or when a boot has pulled away from the ceiling opening. We straighten collapsed runs, re-secure sagging supports, and reattach connections so the run delivers air the way it was designed to.

Metal Duct Repair
Metal ductwork is durable, but the seams and the sheet metal itself take a beating over decades of expansion and contraction. You need metal duct repair when you hear a rattle or a whistling seam, or when a fastener has loosened and created a gap along a trunk line. We re-seal open seams, replace failed connections, and correct the sagging sections that collect dust and restrict flow. Rotobrush inspection equipment lets us see inside those runs before we commit to a fix.

Duct Insulation
Duct insulation is the wrap or liner that keeps conditioned air at temperature while it travels through a cold or hot attic, garage, or basement. You need it replaced when the jacket is torn, the facing is stained, or a run passes through an unconditioned space with bare metal showing. We repair damaged insulation and re-wrap exposed sections, because a sealed duct that loses its insulation still costs you money at the register.
Mastic Sealant
Mastic is the brush-applied sealant that bonds to metal and flex collars and stays put as ductwork moves through the seasons. You need mastic when duct tape has peeled or a previous repair has failed, and you’ll often find the old tape hanging loose at a plenum or a trunk joint. We apply mastic at every accessible connection we find, over mesh on wider gaps, so the seal holds through heating and cooling cycles.
Air Leak Repair
Air leak repair is the diagnostic side of sealing: finding where a system is actually losing pressure, not just where it looks like it might. You need it when supply registers blow weak, when a return pulls air from a dusty attic, or when the same rooms stay uncomfortable no matter what setting the thermostat is on. We trace leaks with the system running, then close them at the source rather than chasing a symptom in one room.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Work With for Duct Repair & Sealing
Our tooling and products come from brands made for this exact work. Rotobrush supplies the rotary brush and vacuum systems we use to inspect and clear duct interiors, so we can see the condition of a run before we seal it. Abatement Technologies equipment is built for indoor air quality work, and it helps us control dust and particulate while we open up ductwork inside a lived-in home. Honeywell and Aprilaire components turn up on the controls and air quality side of the same job, and familiarity with those product lines means our sealing work fits the system around it.
On the sealing side, mastic, mesh, and insulated flex materials come from professional supply lines rather than a hardware aisle. Our technicians have up to 8 years of experience with the fittings and collar types that show up in Fordham’s mix of older houses and renovated units. Whether you have Honeywell controls, Aprilaire filtration, or a system from any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
Duct problems rarely announce themselves with a single obvious symptom. They show up as a pattern: one room that never catches up, a bill that creeps upward, dust that settles faster than it should. Here’s what to watch for.
- Uneven room temperatures. If the bedroom at the end of the run is always five degrees off while the room nearest the unit stays comfortable, that run is likely leaking or disconnected. Sealing it usually restores the balance faster than adjusting dampers.
- Dust that keeps returning after cleaning. A leak on the return side pulls air from a crawlspace, attic, or wall cavity straight into the supply stream. That’s why dust settles again within days of a deep clean.
- Whistling, rattling, or flapping sounds. Whistling means air is squeezing through a gap that shouldn’t be there; rattling or flapping suggests a loose connection or a flex run that has pulled free. Both are sealing jobs, not furnace jobs.
- Higher heating and cooling bills without a usage change. When conditioned air escapes into unconditioned space, the system runs longer to make up the loss. A leak audit often explains a rise that nothing else accounts for.
- Visible tape failure or torn insulation. If you can see peeling foil tape at a joint or a torn outer jacket on a flex run, air is already moving through that gap. Sealing it now costs far less than letting the damage spread.
Our Duct Repair & Sealing Process – Step by Step
- 1
Walk-through and system interview. We start by asking which rooms are uncomfortable and when, then check the air handler, filter, and accessible ductwork. That conversation often points us to the right section of the system before any tool comes out.
- 2
Inspection with professional equipment. We use Rotobrush and Nikro systems to look inside duct runs and see what the eye can’t from a register. Torn liners, disconnected boots, and crushed flex often only show up on a camera or through a controlled vacuum test.
- 3
Leak tracing while the system runs. With the blower on, we trace where pressure drops and where air is escaping, marking every gap we intend to seal. This is the step that separates a real repair from a guess.
- 4
Repair and seal at the source. We re-secure disconnected boots, repair or replace damaged flex and metal sections, apply mastic and mesh on accessible joints, and restore insulation where it has failed. All of it is documented as we go.
- 5
Verification and before-and-after documentation. Before we pack up, we re-check airflow at the registers and confirm the seals are holding. You get before-and-after photos of your own ductwork, so you can see exactly what was sealed and where.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Fordham?
Duct repair and sealing in Fordham is priced per job, not per vent, and the written estimate is what sets the final number. As a general guide, a small job like sealing a handful of accessible joints and re-securing one disconnected boot is usually the least expensive scenario. A mid-size job involving several flex run repairs plus mastic sealing across a trunk line runs higher. Larger repairs, such as replacing damaged metal duct sections or re-insulating runs through an unconditioned attic, sit at the top of the range. We give typical ranges in the written estimate rather than a teaser number over the phone, because installed ductwork varies so much house to house.
What affects the price: how accessible the ductwork is, how many separate leaks or runs are involved, what material is already in place (metal, flex, or a mix), and whether insulation needs to be replaced along with the seal. Homes with ductwork buried behind finished ceilings or in tight crawlspaces take longer to reach, and that labor is the biggest variable.
How to avoid overpaying: insist on one flat price per system agreed before work starts, ask for a written scope of what will be sealed, and ask to see before-and-after photos of your actual ducts. That combination keeps the job honest and gives you a record of what was done. The estimate is free and includes a walk-through, inspection, and a written scope with the price on it.
Duct Repair & Sealing Near Fordham – Our Service Area
We work throughout Fordham and the surrounding Bronx neighborhoods, including Bedford Park, Tremont, Kingsbridge, University Heights, and Spuyten Duyvil, plus West Farms, Highbridge, Inwood, and Williamsbridge. Response times depend on where you are and what’s on the schedule, but we dispatch from 7am to 7pm, Sunday through Friday, and same-day appointments are often possible. If you’re outside the immediate Fordham area, mention your neighborhood when you call and we’ll confirm before booking. For nearby coverage, see our duct repair & sealing page for Bedford Park.
Serving Fordham, NY – Our Local Coverage Area
We serve Fordham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Fordham
Duct repair and sealing is the process of fixing damaged ductwork and closing the gaps where conditioned air escapes before it reaches your rooms. It covers repairing torn flex runs, re-securing disconnected boots, sealing metal seams with mastic, and restoring insulation where it’s failed. The goal is to keep the air you pay to heat or cool inside the duct system. Call (833) 901-6929 for a free estimate.
Most residential duct repair and sealing jobs take a few hours, depending on how many runs are involved and how accessible the ductwork is. A straightforward sealing job on a handful of joints can wrap up quicker than a multi-run repair through tight attic or crawlspace access. We give you a realistic time window with the written estimate so you can plan around it. Call (833) 901-6929 to book and get a time estimate.
We price duct repair and sealing per job, not per vent, and the written estimate sets the final price before any work starts. Cost depends on how many leaks are involved, the material already installed, and how hard the ductwork is to reach. A short walk-through gives you a clear number rather than a guess. Call (833) 901-6929 for a free estimate.
Yes. We work with Honeywell and Aprilaire product lines and know how their controls and air quality components fit into a duct system. That familiarity matters when sealing work is done around a filtration setup or a zoned control system, because the seals need to fit the components already in place. If your system uses either brand, mention it when you call. Call (833) 901-6929 for a free estimate.
Same-day appointments are often available. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Yes. Our work carries a satisfaction guarantee, and you get before-and-after photos of your own ductwork so you can see exactly what was sealed. Every job is quoted at one flat price per system, agreed before work starts, so there are no surprises on the invoice. Call (833) 901-6929 to schedule and review the details with us.
Clear access to the main duct trunk, the air handler, and any attic or crawlspace hatch is the biggest help. Move stored items away from the furnace area and registers, and note which rooms are consistently uncomfortable so we can focus the inspection. Pets should be secured while equipment is running. Call (833) 901-6929 if you have questions about access before the visit.
Schedule Your Duct Repair & Sealing Service in Fordham Today
If your system is leaking air, sealing it is one of the smartest fixes you can make for comfort and efficiency. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You get a free estimate, one flat price per system, before-and-after photos, and a satisfaction guarantee. Call (833) 901-6929 to book your duct repair & sealing appointment in Fordham, or explore our air duct cleaning Fordham services for the full air pathway.
Written by the team at Air Duct Cleaning Fordham.